6.9.11

‘Innovation Ecosystem’

Sydney-based Mark Tyrrell Studio has collaborated with Daniel Griffin to create a first prize winning entry to the 2011 international design competition Ideas on Edge Parramatta. The competition received over 150 entries, 40% international and the remainder from around Australia. There were three equal winners.
Tyrrell and Griffin’s concept focuses upon blurring the physical and metaphysical boundaries between the local culture of Parramatta, and its local ecosystem, finding moments of architectural drama at their junction.
View this competition brief:
Drawing showing the natural processes of the river, its species diversity and how this is translated into an architecture which is ‘of’ the river. View over raingarden edge and into ‘The Birdshell’.

Drawing showing the natural processes of the river, its species diversity and how this is translated into an architecture which is ‘of’ the river. View over raingarden edge and into ‘The Birdshell’.
Project Description from the Architects:
The scheme recognises that the site is located at a brackish point of the river where the fresh water from the inland meets the salt water from the coast. This mixing of waters produces a highly diverse ecosystem at a local level. It is a place where species of fish meet, where salt and freshwater tolerant plant species are found and where hundreds of birds are attracted to the mix.
Interestingly, the site also occurs at a key urban point where the busy urban spine of Church Street meets the river. Unfortunately, Parramatta has progressively turned its back on its river, which has become a forgotten drain rather than a living, changing natural focus for the city.
A view from the river into the proposal, showing the birdshell weaving beneath existing road/river infrastructure, further blurring the rivers edge.

A view from the river into the proposal, showing the birdshell weaving beneath existing road/river infrastructure, further blurring the rivers edge.
The design breaks down a series of abrupt and divisive river edges by laying a generative grid over river and land. The grid resolves itself into a variety of functional built elements in the design but also acts as a conceptual tool to blur land and water.
Next, a series of ‘program intensifiers’ are layered on the design. Local culture is intensified through the creation of an urban incubator for innovation and ideas. This takes the form of small studio spaces, research labs, aged and childcare, performance spaces and university and corporate support shopfronts. Together, this small-scale urbanism plugs into the disused rear of shops and creates a humming cultural district which moves out over the river.
View towards the innovation incubator, showing how new urban forms are clipped onto the dead edges of existing buildings. Also shows power generation grid overlaying the rivers edge.

View towards the innovation incubator, showing how new urban forms are clipped onto the dead edges of existing buildings. Also shows power generation grid overlaying the rivers edge.
The ecology of the site is intensified through a large sculptural building called ‘The Birdshell’. The building is a conference centre, but its façade accommodates and is designed around a celebration of urban birdlife. Hard concrete becomes a soft and living veil. From within the conference centre, birds create a shadow play on the walls. The form of the shell is designed to both amplify the varied birdcalls and to draw in and cool breezes from the river. It is an open aviary of an urban scale.
The site is allowed to flood regularly, and runoff is collected in a mosaic of raingardens that treat stormwater from the urban core of the design and release it clean to the river. Ultimately, the river has no edge in the final proposal; it is an urbanism ‘of ‘ a river rather than ‘beside’ a river.
The Parramatta City Council has been talking about turning Parramatta into Venice since mid 2010. However, Parramatta council does not need to copy the European model. Griffin and Tyrrell’s winning scheme aims to show that Parramatta has its own unique and Australian landscape identity, which should be fused with its own local culture to create a catalytic urbanism suited to Sydney’s second city, not Italy’s.
Complete competition board of the

Complete competition board of the "Innovation Ecosystem" entry
Images courtesy of Mark Tyrrell Studio.

13.4.11

BOXHOME: Small Living Inside A Stylish Norwegian Box

boxhome-by-rintala-eggertsson-architects-squ-ivan_brodey_2.jpg

Boxhome is a small, residential project in Oslo by Norwegian architects Rintala Eggertsson.

boxhome-by-rintala-eggertsson-architects-sami_rintala_mh_1.jpg

The 19 square metre dwelling is described by the architects as being “a peaceful small home, a kind of urban cave”.

boxhome-by-rintala-eggertsson-architects-sami_rintala_yk_1.jpg


It is constructed using a timber frame and is clad in aluminium. Internally, a different species of wood was chosen for each room.

boxhome-by-rintala-eggertsson-architects-ivan_brodey_4.jpg

Here’s some more information from Rintala Eggertsson:

–

In the North all residential buildings have to be constructed in an advanced way due to the ever-changing weather. Additionally, houses have to be artificially heated for more than half of the year. Therefore producing smaller homes would bring about a considerable economical and ecological benefit. Today the construction industry is responsible for more than one third of total global energy and material consumption, well exceeding that of all traffic and transport. This should be a crucial question especially in Scandinavia, where people, in accordance with their growing wealth, possess larger and larger houses. And in most cases, this is in addition to a second home called a summer house or a cottage.

boxhome-by-rintala-eggertsson-architects-ivan_brodey_1.jpg

Boxhome is a 19 square metre dwelling with four rooms covering the basic living functions: kitchen with dining, bathroom, living room and bedroom.

boxhome-by-rintala-eggertsson-architects-boxhome_sketch.jpg

Firstly, the project focuses on the quality of space, materials and natural light, and tries to reduce unnecessary floor area. The result is a dwelling which is a quarter of the price of any same size apartment in the same area. Boxhome is a prototype building, yet the same attitude could be taken further to bigger family housing and consequently to work places.

boxhome-by-rintala-eggertsson-architects-sketch_bathroom.gif

The basic need to house a family has become a great business adventure. Making a simple house, after all, is perhaps not such a difficult task. Moreover, meeting the official construction restrictions and laws usually means the use of building industry products and services, thus limiting the possibility of real change and development.


boxhome-by-rintala-eggertsson-architects-bedroom_sketch.gif

Thirdly, in Western societies at the moment we are enjoying the highest standard of living ever know to human kind. At the same time we are fully informed of the results of our culture of consumerism. Therein lays the greatest paradox: We are forced to actively forget the real reality to be able to enjoy the facade of excess we have created around us.

boxhome-by-rintala-eggertsson-architects-abitare_1.jpg

Finally, and most importantly, the goal has been to make a peaceful small home, a kind of urban cave, where a person can withdraw to, and whenever they wish, forget the intensity of the surrounding city for a while.

boxhome-by-rintala-eggertsson-architects-abitare_2.jpg

boxhome-by-rintala-eggertsson-architects-presentation_drawings_2.gif

boxhome-by-rintala-eggertsson-architects-boxhome_2.gif

boxhome-by-rintala-eggertsson-architects-boxhome_1.jpg

Client: Galleri ROM, Maridalsveien 3, Oslo, Norway.
Curator: Henrik de Menassian

Work group:
Sami Rintala, architect Oslo

Dagur Eggertson, architect Oslo
John Roger Holte, artist Oslo
Julian Fors, architect student Vienna

Sponsors:
Aspelin-Ramm/ fundingInfill/ funding
Ruukki/ metal facades
Pilkington Floatglass/ windows
Optimera Industri/ interior wood


Vitra Scandinavia/ chair and lamps

SM-Lys/ lamps

Byggmakker/ construction material
Glava Isolasjon/ insulation

Materials:
wood:

pine/ structures
cypress/ interior walls and floors
birch/ kitchen

spruce/ bathroom
red oak/ living room
nut/ bedroom
aluminium:

facades

Size: exterior measures 5500 cm (length) x 5700 cm (height) x 2300 cm (width).

18.11.10

Camouflage Architecture: underground buildings

If you're familiar with the Wombles, then you probably encountered underground architecture at any early age.

The Wombles' home was located in the London suburb of Wimbledon, close to the underground station, and embodied every child's dream: subterranean and cave-like, it was made from stuff that society had thrown away. It was an early example of sustainability and the use of recycled building materials.

It's unlikely that the following projects were inspired by the Wombles, but that doesn't mean they're any less successful in terms of their functionality and singularity.


Camouflage Architecture: underground buildings

Black rocks at the coast, photo © Denton Corker Marshall



In the Swiss town of Vals, known for its thermal baths, it's not a meteor strike that's created a inverted-dome-shaped hole in the ground: it's a holiday home.

Astonished by the relaxed planning regulations in the vicinity of the baths – an architectural masterpiece by Peter Zumthor – the owner of the house decided on a minimal approach, so as not to obstruct views of the spa complex.

The building embeds itself fully into the landscape, yet offers sufficient natural light and views out onto the picturesque countryside.


Camouflage Architecture: underground buildings

Villa Vals, architecture: SeARCH / Bjarne Mastenbroek i.c.w. CMA, photographer: Iwan Baan

Architects Christian Müller and Bjarne Mastenbroeck achieved this by arranging the windows at angles around a circular courtyard. The entrance is perfectly concealed: you arrive across a 'Maiensäss', a typical wooden alpine cabin, and then go through an underground tunnel.

This idea is reminiscent of the 'Fake Chalets' exhibition at the Design Museum in Zurich, which featured photographs of observation bunkers disguised as barns.



To the article "Indestructible Remembrance - The conversion of European bunkers"


Camouflage Architecture: underground buildings

Villa Vals, architecture: SeARCH / Bjarne Mastenbroek i.c.w. CMA, photographer: Iwan Baan





  • Camouflage Architecture: underground buildings

    Interior of Villa Vals, architecture: SeARCH / Bjarne Mastenbroek i.c.w. CMA, photographer: Iwan Baan








  • The Marshall House by Australian architects Denton Corker Marshall is buried in the dunes of the Melbourne coastline. Looking back from the small bay's beach, it's only visible as a black line; the local rock is of the same hue.

    Camouflage Architecture: underground buildings

    Marshall House, east of Melbourne, architecture: Denton Corker Marshall, © Denton Corker Marshall






  • The house itself is defined by a wall, which, in turn, marks out a generous, square courtyard, a bit like a sports ground. This north-facing outdoor space offers protection from stormy sea winds and traps the Australian winter sun.

    The outer façade of the structure faces towards the sea. Each room's window openings are sized and arranged in such a way that allow picture-like views of the sea.

    Camouflage Architecture: underground buildings

    Marshall House, east of Melbourne, architecture: Denton Corker Marshall, © Denton Corker Marshall






  • Camouflage Architecture: underground buildings

    Interior of Marshall House, east of Melbourne, architecture: Denton Corker Marshall, © Denton Corker Marshall





  • The Aloni House is located in a similarly rugged coastal landscape, yet in a different hemisphere. The terrain of the Greek Cyclades has been transformed over hundreds of years into a terraced, agricultural landscape. Stone walls prevent erosion and make the cultivation of the steep land easier.

    Camouflage Architecture: underground buildings

    Aloni House, Antiparos island, aerial view, architecture: decaArchitecture, © decaArchitecture







  • Camouflage Architecture: underground buildings

    Aloni House, Antiparos island, elevation, architecture: decaArchitecture, © decaArchitecture





  • The design of the Aloni House took a cue from these existing natural-stone walls. The architectural intervention is located in a hollow between two mountain slopes and creates a bridge, so to speak, between two contours. The house's sides disappear into the ground, blending the structure into the landscape. To the front, the land falls away, allowing one of the house's long elevations a view of the sea. There are five internal courtyards, which flood the rooms with light and shield windows and doors from stormy rainwater.

    Camouflage Architecture: underground buildings

    Aloni House, Antiparos island, architecture: decaArchitecture, © decaArchitecture






  • Camouflage Architecture: underground buildings

    Interior of Aloni House, Antiparos island, architecture: decaArchitecture, © decaArchitecture






  • A whole development of underground homes is due to be built in the conservation area near Frank Lloyd Wright's famous Fallingwater house in Pennsylvania. Patkau Architects won a competition run by the Western Pennsylvania Conservancy, an institute that looks after the preservation and maintenance of Fallingwater.

    Camouflage Architecture: underground buildings

    Cottages at Fallingwater (USA), architecture: Patkau Architects, rendering © Patkau Architects





  • The six new units will serve as accommodation for participants in the institute's further-education programme.


    The jury praised the subtle, yet progressive, character of the design, with its minimal impact on the landscape, which also met the criteria of sustainability and energy efficiency that had been set down.

    Camouflage Architecture: underground buildings


    Cottages at Fallingwater (USA), architecture: Patkau Architects, rendering © Patkau Architects







  • Camouflage Architecture: underground buildings


    Model of Cottages at Fallingwater (USA), architecture: Patkau Architects, photo © Patkau Architects







  • Camouflage Architecture: underground buildings

    Interior of Cottages at Fallingwater (USA), architecture: Patkau Architects, rendering © Patkau Architects





  • The California Academy of Sciences is the last and also the biggest of the projects discussed here; it is less subterranean than the others, but just as integrated into its physical context.

    Most notable about Renzo Piano's California Academy of Sciences is its 'roofscape'. The academy brings together research, natural-science collections, teaching and public exhibitions under one roof, and houses an aquarium, a planetarium and a rainforest biosphere. These three building elements represent outer space, Earth and the oceans, and function as the three 'columns' that support the roof and form the roofscape's three hills.

    Camouflage Architecture: underground buildings


    Aerial view of the Goldengate Park, San Francisco, photographer: Tom Fox, SWA Group








  • Made of rock, the aquarium alone, which is open to visitors, can house 38,000 species from all over the planet.


    The institute's scientific collection, which belongs to the research department, contains 18 million specimens in jars and other special containers. With its mission 'To Explore, Explain and Protect the Natural World', the academy's design programme was always destined to be a sustainable one. Apart from the building's energy-saving features, valuable consideration was given to the choice of materials and to the re-using of building elements from the old academy.

    Camouflage Architecture: underground buildings

    Californian Academy of Sciences, photographer: Ishida Shunji © Rpbw, Renzo Piano Building Workshop






  • The structure's insulation consists in part of recycled denim jeans, and the roof not only gives a bit of nature back, but also functions to stop heat escaping. In the middle of the roofscape, over the interior piazza, is a large, glazed skylight; lots of smaller, hole-like skylights are dotted across the roof, offering natural daylight and opening automatically to give the interiors natural ventilation.

    Camouflage Architecture: underground buildings

    Californian Academy of Sciences, view of roof, photographer: Mc Neal Jon © Rpbw, Renzo Piano Building Workshop







  • Camouflage Architecture: underground buildings

    Skylights in the roof allow sunlight to reach the living rainforest and coral reef. They also open automatically to allow heat to escape, photographer: Justine Lee © Rpbw, Renzo Piano Building Workshop






  • Camouflage Architecture: underground buildings

    Conceptual sketch of the Piazza, photographer: Goldberg Stefano - Publifoto © Rpbw, Renzo Piano Building Workshop






  • The green roof stretches all the way to the outer walls, where it meets a glass canopy containing over 55,000 solar-energy cells. The roof's substructure consists of a combination of concrete and steel framework. A water-retentive layer is built into the roof structure. The rest of the building is realised in light-grey exposed concrete (including the African Hall, whose original rendering in limestone was reused); the moulding holes were left open to allow for the fixing of exhibits.

    Camouflage Architecture: underground buildings

    View of the exhibit hall of the Californian Academy of Sciences, view to the West, Photographer: Nic Lehoux © Rpbw, Renzo Piano Building Workshop


  • Source: archdaily

    The Green School / PT Bambu

    By Nico Saieh , , , ,
     

    Architects:
    Location: Badung, ,
    Client: Yayasan Kul Kul
    Project Area: 7,542 sqm
    Project Year: 2007
    Photographs: , Ahkamul Hakim

    site plan

    Environmentalists and designers John and Cynthia Hardy wanted to motivate communities to live sustainably. Part of that effort was to show people how to build with sustainable materials, namely . They established the Green School, and its affiliates: the Meranggi Foundation, which develops plantations of plants through presenting seedlings to local rice farmers; and , a for-profit design and construction company that promotes the use of as a primary building material, in an effort to avoid the further depletion of rainforests.

    © Ahkamul Hakim

    The Green School, a giant laboratory built by , is located on a sustainable campus straddling both sides of the Ayung River in Sibang Kaja, , within a lush jungle with native plants and trees growing alongside sustainable organic gardens. The campus is powered by a number of alternative energy sources, including a sawdust hot water and cooking system, a hydro-powered vortex generator and solar panels. Campus buildings include classrooms, gym, assembly spaces, faculty housing, offices, cafes and bathrooms. A range of architecturally significant spaces from large multi-storey communal gathering places to much smaller classrooms are a feature of the campus. Local , grown using sustainable methods, is used in innovative and experimental ways that demonstrate its architectural possibilities. The result is a holistic green community with a strong educational mandate that seeks to inspire students to be more curious, more engaged and more passionate about the environment and the planet.


    Source: archdaily

    16.8.10

    Art615, a pavilion by Aalborg University students

    By Sebastian J — Filed under: Pavilion , Structures , ,
     

    A group of students of the Faculty of Architecture and Design at Aalborg University, , finished a Digital Design Miniproject. Originally Art615 is meant as an art pavilion for a crime-related park in Aalborg, . The concept mainly focused on drawing attention from the unsafe park, and ensuring the feeling of a safer environment for the visitors.

    More images, a video, and the students’ description after the break.

    Intense work of 43 students at the Department of Architecture & Design, (), creates the framework for the workshop ‘Social Technologies’.

    The workshop explores the basic exercise in the development of dynamic architectural concepts and computer-generated geometry. The vision was to challenge the complex programs of the urban field and to explore the inherent potentials of new digital tools. Working with two main focus areas, the workshop simultaneously aimed at developing advanced spatial systems for organizing and articulating new social complexities, and at utilizing and adapting different advanced digital design methods for exploring various principles of form generation and advanced production.

    In collaboration with architects, CNC-manufacturing companies, media artists, sociologist and the Danish National Crime preventing council – the students participating in the workshop sought to explore the ways in which advanced digital design methods can generate new alternatives for the existing anti-crime initiatives, where technology is often being used to identify guilty persons. The workshop encourages research in the crossing between performative formations and interactive light systems, thus enabling discussions on local culture production and social potentials in form.

    During the workshop the students were among other things introduces to: the development of dynamic architectural concepts, digital tools as Grasshopper for Rhino and RhinoScripting, the utilization of sensor technology and dynamic light control in the software vvvv, and to work with digital technologies and interactive urban environments on a conceptual level.

    After three weeks of intense work, seven individual projects were selected among 43. The 43 attendants were then merged into seven groups – one for each selected project – and now had one week to finalize the projects, by making them ready for CNC-production, finalizing sensor technology and dynamic light control. To train the students’ ability to work with different factors of challenges at the same time – including the possible difficulties by working with specific materials – the winning project, Art615, was to be realized in full scale, solely in MDF-wood.

    Originally Art615 is meant as an art pavilion for a crime-related park in Aalborg, . The concept mainly focused on drawing attention from the unsafe park, and ensuring the feeling of a safer environment for the visitors.

    Inside the pavilion, three monitors display art from local artists. The lighting – programmed in VVVV – analyzes the colors and proportions of the art and a nearby projector displays these colors on the pavilions scales. This creates a picturesque environment inside the pavilion – presenting the visitors a new interpretation of the art, by giving them a chance to “step into the art” itself.

    After one week of assembly, the pavilion mainly stands as a structure at Platform4 in Aalborg ().

    The main form of the pavilion is originally described as a simple surface in Rhino. The form is derived and chosen out of multiple iterations – where the main focus was to create a semi-closed space and emphasize the increasing build-up of the shape from the smaller end to the larger. Parametric modeling in Grasshopper allowed us to tweak all parameters controlling the form, until we were satisfied with the structural abilities and overall aesthetic.

    The surface is then dissected into 32 vertical and 4 horizontal struts by using Grasshopper to define a structural waffle-system. The system allowed us to connect the different struts, by merely sliding them into each other – the size of the gaps in the struts and the character of the MDF, meant that they interlocked and were kept fixed.

    With the CNC-milling machines’ material dimension limitations of 2,4×1,2 meters, and with some of the struts reaching lengths of 6,5 meters – the individual struts had to be dissected into shorter fragments. A puzzle-joint made in Grasshopper was inserted between these fragments. To ensure static stability, metal-plates were bolted and screwed around the joint itself.

    The scales define the overall form of the pavilion and are the result of a paneling definition done in Grasshopper. The main idea with the outer shell is working with transparency.

    “We wanted to work with the inside and outside of Art615 and also make a spatial connection between these two spaces. By perforating the shell, the scales are able take advantage of the displayed light on the inside and at the same time create a visual and audible connection between the two spaces.”

    Art615 is the result of seven 4th semester students’ experiments and researches in linking CNC fabrication techniques, digital parametric sketching and dynamic light control.

    Student Design/Management/Installation Team/Layout/Design and Component Production:
    Bachelor Stud. Senad Gvozden
    Bachelor Stud. Bjarke Mejnertsen
    Bachelor Stud. Kenneth Rytter
    Bachelor Stud. Bjarke Apollo
    Bachelor Stud. Jacob Hilmer
    Bachelor Stud. Dennis Jensen

    For more information, click here.

     
    Copyright 2009 level03. Powered by Blogger Blogger Templates create by Deluxe Templates. WP by Masterplan